Model No.: WXE-10MDR-12
Model NO.: WXE-10MDR-12
Warranty: >2 Years
Input Voltage: 15V
Starting Mode: Self-excited Switching Power Supply
Power Supplying System: Terminal Power Distribution Equipment
Modulation System: PFAW
Transport Package: Standard Export Packing
Output Type: Single
Output Power: 1 - 50W
Connection Mode: Series Switching Power Supply
Voltage Regulating Mode: Frequency Modulation Type
Energy Transmission: Two-way Transmission
Certification: CE, UL, RoHS, ISO, CCC, CB, CSA
HS Code: 8504401990
•Universal AC input/Full range
•Protections: Short circuit / Overload / Over voltage
•Cooling by free air convection
•Can be installed on DIN rail TS-35/7.5 or 15
•Built in DC OK active signal
•LED indicator for power on
•No load power consumption<0.75W
•100% full load burn-in test
•3 years warranty
|RIPPLE & NOISE (max.) Note.2||80mVp-p||120mVp-p||120mVp-p||150mVp-p|
|VOLTAGE TOLERANCE Note.3||±5.0%||±3.0%||±3.0%||±2.0%|
|SETUP, RISE TIME Note.5||500ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load|
|HOLD UP TIME (Typ.)||120ms/230VAC 25ms/115VAC at full load|
|VOLTAGE RANGE||85 ~ 264VAC 120-370VDC|
|FREQUENCY RANGE||47 ~ 63Hz|
|AC CURRENT (Typ.)||0.33A/115VAC 0.21A/230VAC|
|INRUSH CURRENT (Typ.)||COLD START 35A/115VAC 70A/230VAC|
|OVERLOAD||Above 105% rated output power|
|Protection type: Hiccup mode, recovers automatically after fault condition is removed|
|Protection type: Shut down o/p voltage, re-power on to recover|
|FUNCTION||DC OK ACTIVE SIGNAL (max.)||3.75 ~6V/ 50mA||9 - 13.5V/40mA||11.5-16.5V/40mA||18-27V/20mA|
|WORKING TEMP.||-20 ~ +70°C (Refer to "Derating Curve")|
|WORKING HUMIDITY||20 - 90% RH non-condensing|
|STORAGE TEMP., HUMIDITY||-40 ~ +85°C ,10- 95% RH|
|TEMP. COEFFICIENT||±0.03%/°C (0 - 50°C)|
|VIBRATION||Component: 10 - 500Hz, 2G10min./1 cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6|
|SAFETY STANDARDS||UL508, TUV EN60950-1 approved|
|WITHSTAND VOLTAGE||l/P-0/P:3KVAC l/P-FG:2KVAC 0/P-FG:0.5KVAC|
|ISOLATION RESISTANCE||l/P-O/P, l/P-FG, 0/P-FG:100M Ohms/500VDC/25°C/70% RH|
|EMC EMISSION||Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2.-3|
|EMC IMMUNITY||Compliance to EN610004-2,3,4,5,6,8,11, EN55024.EN61000-6-1 ,EN61204-3, light industry level, criteria A|
|MTBF||584Khrsmin. MIL-HDBK-217F (25°C)|
| 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3.Tolerance : includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies."
5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
• Power tools series: Electric Saw, Drilling Machine, Ginder, Sand blast Machine, Pouching Machine,Weeding Machine,Air Compressor etc.
• Office series: Computer,Printer,LCD Monitor,Scanning Machine etc.
• Household Appliance series: Dust Collector,Fan Lamp or LED ,Sewing Machine etc.
• Kitchen Appliance series: Microwave Oven, Fridge, Freezr, Coffemarker etc.
• Industrial Equipment series: shipping,vehicle,metalhalide lamp,solar system,wind power generation etc.
• Electrical filed series: TV,VCRS,Radio etc.
Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Din Rail Power Supply
Premium Related Products