Nes-25-15 AC DC Switching Mode Power Supply
Basic Info
Model No.: MWNES-25-15
Product Description
Model NO.: MWNES-25-15 Warranty: >2 Years Input Voltage: 15V Starting Mode: Self-excited Switching Power Supply Power Supplying System: Terminal Power Distribution Equipment Modulation System: PFAW Brand: Omwo Specification: 159*98*38mm HS Code: 8504401990 Output Type: Single Output Power: 1 - 50W Connection Mode: Series Switching Power Supply Voltage Regulating Mode: Frequency Modulation Type Energy Transmission: Two-way Transmission Certification: CE, UL, RoHS, ISO, CCC, CB, CSA Trademark: OMWO Origin: Zhejiang 25W NES-25-15
* Universal AC input/Full range
* Protections: Short circuit / Overload / Over voltage / Over temperature
* Cooling by free air convection
* 100% full load burn-in test
* 2 years warranty
Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.
* Universal AC input/Full range
* Protections: Short circuit / Overload / Over voltage / Over temperature
* Cooling by free air convection
* 100% full load burn-in test
* 2 years warranty
MODEL | NES-25-5 | NES-25-12 | NES-25-15 | NES-25-24 | NES-25-48 | |
OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V | 48V |
CURRENT RANGE | 0 ~ 5A | 0 ~ 2.1A | 0 ~ 1.7A | 0 ~ 1.1A | 0 ~ 0.57A | |
RATED CURRENT | 5A | 2.1A | 1.7A | 1.1A | 0.57A | |
RATED POWER | 25W | 25.2W | 25.5W | 26.4W | 27.36W | |
RIPPLE & NOISE (max.) Note.2 | 80mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | 240mVp-p | |
VOLTAGE ADJ. RANGE | 4.75 ~ 5.5V | 10.8 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 26.4V | 43.2 ~ 52.8V | |
VOLTAGE TOLERANCE NOTE.3 | 2.0% | 1.0% | 1.0% | 1.0% | 1.0% | |
LINE REGULATION | 1.5% | 0.5% | 0.5% | 0.5% | 0.5% | |
LOAD REGULATION | 1.5% | 0.5% | 0.5% | 0.5% | 0.5% | |
SETUP, RISE TIME NOTE.5 | 500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load | |||||
HOLD UP TIME (Typ.) | 50ms/230VAC 10ms/115VAC at full load | |||||
INPUT | VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 370VDC | ||||
FREQUENCY RANGE | 47 ~ 63Hz | |||||
EFFICIENCY (Typ.) | 78% | 83% | 84% | 86% | 86% | |
AC CURRENT (Typ.) | 0.55A/115VAC 0.35A/230VAC | |||||
INRUSH CURRENT (Typ.) | COLD START 45A | |||||
LEAKAGE CURRENT | <2mA / 240VAC | |||||
PROTECTION | OVER LOAD | 110 ~ 150% rated output power | ||||
Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||||||
OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | 55.2 ~ 64.8V | |
Protection type : Shut down o/p voltage, re-power on to recover | ||||||
ENVIRONMENT | WORKING TEMP. | -20 ~ +60oC (Refer to output load derating curve) | ||||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||
STORAGE TEMP., HUMIDITY | -40 ~ +85oC , 10 ~ 95% RH | |||||
TEMP. COEFFICIENT | 0.03%/oC (0 ~ 45oC ) | |||||
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||
SAFETY &EMC(Note 4) | SAFETY STANDARDS | UL60950-1, CB(IEC60950-1) approved | ||||
WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |||||
EMI CONDUCTION & RADIATION | Compliance to EN55022 (CISPR22) Class B | |||||
HARMONIC CURRENT | Compliance to EN61000-3-2,-3 | |||||
EMS IMMUNITY | Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, light industry level, criteria A | |||||
Others | MTBF | 411.47Khrs min. MIL-HDBK-217F (25 ) | ||||
DIMENSION | 99*82*35mm (L*W*H) | |||||
PACKING | 0.3Kg; 45pcs/14.5Kg/0.66CUFT | |||||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meetsEMC directives. |
Product Categories : Single Output Switching Power Supply
Premium Related Products
Other Products
Hot Products
Indexable Turning Tool Insert HolderWaterproof Camouflage Solar Backpack BagPlug Power Meter Socket with Big LCD 10A 220V2 Lamps LED Down Light 20W Square Shape Recessed Indoor LightingFreezer Cabinet Door Light SwitchHigh Quality K Type Thermocouple Temperature SensorHigh Quantity Food Waste Garbage DisposerCm1 Series Moulded Case Circuit Breaker/MCCBHigh Quality Changeover Switch Enclosure150A Latching Relay 250VAC 3b Relay Latch RelayHigh Quality Cylind Inductive Proximity SwitchHigh Quality Infrared Motion SensorWxe-35s-2 AC/DC Compact Single Output Enclosed LED Switching Power Supply10W 24V Industrial DIN Rail Power SupplyPower Supply SMPS Source 12V 50W LED Driver 12V 4A Power DriverMwnes-35-48 48V LED Switching Power Supply