60 W Pistola Termica Glue Gun With Switch
Basic Info
Model No.: KV-JQ601K
Product Description
How to use the 60 W Pistola Termica Glue Gun
Plug in 60 W Pistola Termica Glue Gun. Load the glue sticks into the back of the glue gun.
Press trigger several times until the glue stick is firmly set into the inlet tube.
Allow the glue gun to warm up for approximately 5 minutes.
Squeeze trigger until glue flows from nozzle.
Glue need not to be spread. Press surfaces together within 15 seconds. Use of clamps or other bonding devices is not necessary. Clean surfaces for best bonding.
Unplug 60 W Pistola Termica Glue Gun when finished. No clean up required. Never pull the glue stick up out the back of the glue gun.
60 W Pistola Termica Glue Gun With Switch Specification:
Input: | 110-250V, AC, 60(15) W | Flow rate of glue: | 12-16 g/min |
Diameter of glue stick: | 10.8~11.5 mm | Length of glue stick: | 70~300 mm |
Application temperature: | 130~290℃ | Product weight: | 283 g |
Nozzel diameter: | 1.0~2.0 mm | Pre-heating time: | 3-5 mins |
Product Size: | 19.3x16.6 cm | Certification: | CE,GS,ROHS,KC,SAA,ISO |
Inner box: | 10 pcs | Outer ctn: | 40 pcs |
Inner box size: | 35.5x31x20 cm | Outer ctn size: | 64x42x37 cm |
G.W.: | 16.1 kgs | N.W.: | 11.3 kgs |
60 W Pistola Termica Glue Gun With Switch Show:
60 W Pistol Thermic Glue Gun With Switch Important Caution:
1. Before use the glue gun, check if the plug cord into electrical outlet properly;
2. When glue gun in first use, the heating element will have small smoke, it is normal situation, but the smoke will disappeared after 10 minutes;
3. After power, not for a long time in standby mode(not longer for 20 minutes), when the suspension of use, unplug first.
4. Avoid to use the glue gun under very hot or very cold environments.
5. Better not work under direct cold wind blowing, it will reduce efficiency and loss power
6. When in continuous using, do not press the trigger with great pressure, and try to squeeze out the un-melted glue, it would damage the glue gun
7. Not applicable for bonding heavy objects or objects needed strong adhesive
8. The quality of glue stick will directly influence the glue gun function and sticking objects quality;
9. If the power cord is damaged, do not replace it by yourself, must ask for professionals to replace it.
10. This tools must b e placed in its position when not in use. And storage before the tools complete cooled.
11. Be careful when using any other electrical appliance with flammable material.
12. Not applicable for a long time in the same place.
13. Do not use an explosive gas atmospheres.
14. Note that heat may be the line of sigh, combustible materials.
15. Do not leave equipment unattended when switched on.
16. This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17. Children should be supervised to ensure that they do not play with the appliance.
Product Categories : High Quality Hot Melt Glue Gun > Professional Glue Gun