Basic Info
Model No.: NES-100-5
Product Description
1. Din-Rail SMPS 24V is Globally applicable AC input power
2. Low-cost, high reliability
3. Protection: short circuit/ overload/ over-voltage/ over temperature
4. Cooling by free air convection
5. Din-Rail SMPS 24V in small size, light weight
6. 100% full load burn-in test
7. Built-in EMI filter, a very small ripple
8. 2 years warranty
9. CCTV power supply,dc power supply,12v power supply
| MODEL | NES-100-5 | NES-100-12 | NES-100-15 | NES-100-24 | NES-100-48 | ||
| OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V | 48V | |
| RATED CURRENT | 20A | 8.5A | 7A | 4.5A | 2.3A | ||
| CURRENT RANGE | 0 ~ 20A | 0 ~ 8.5A | 0 ~7A | 0 ~ 4.5A | 0~2.3A | ||
| RATED POWER | 100W | 102W | 105W | 108W | 110.4W | ||
| RIPPLE & NOISE (max.) | 80mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | ||
| VOLTAGE ADJ. RANGE | 4.75~5.5V | 11.4~13.2V | 13.5~16.5V | 22.8~26.4V | 45.6~52.8V | ||
| VOLTAGE TOLERANCE | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ||
| LINE REG-ATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||
| LOAD REG-ATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||
| SETUP, RISE TIME | 500ms,20ms/VAC 500ms,30ms/115VAC at full load | ||||||
| HOLD TIME | 30ms/230VAC 25ms/115VAC at full load | ||||||
| INPUT | VOLTAGE RANGE | 90~132VAC/180~264VAC selected by switch 254~370VDC | |||||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||||
| EFFICIENCY (Typ.) | 80% | 84% | 84% | 86% | 86% | ||
| AC CURRENT | 2A/115VAC 1.2A/230VAC | ||||||
| INRUSH CURRENT (max.) | Cold Start 36A | ||||||
| LEAKAGE CURRENT | <2mA/240VAC | ||||||
| PROTECTION | OVERLOAD | 110~150% rated output power | |||||
| Protection type :Constant current limiting, recovers automatically after fault condition is removed | |||||||
| OVER VOLTAGE | 5.75~6.75V | 13.8~16.2V | 17.25~20.25V | 27.6~32.4V | 55.2~64.8V | ||
| Protection type :Shut off | |||||||
| ENVIRONMENT | WORKING TEMP. | -20 ~ +60°C | |||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85°C, 10 ~ 95% RH | ||||||
| TEMP. COEFFICIENT | ±0.02%/ (0 ~ 40°C) | ||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min | ||||||
| SAFETY & EMC | SAFETY STANDARDS | Desgin refer to -1012,EN60950-1,EN61347-1,EN-61347-2 approved | |||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | ||||||
| EMC EMISSION & IMMUNITY | EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved | ||||||
| Others | MTBF | ≥300K hrs min | |||||
| DIMENSION | 159×97×38mm (L*W*H) 0.55kg | | |||||
| MODEL | NES-35-5 | NES-35-12 | NES-35-15 | NES-35-24 | NES-35-48 | |
| OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V | 48V |
| CURRENT RANGE | 0 ~ 7A | 0 ~ 3A | 0 ~ 2.4A | 0 ~ 1.5A | 0 ~ 0.8A | |
| RATED CURRENT | 7A | 3A | 2.4A | 1.5A | 0.8A | |
| RATED POWER | 35W | 36W | 36W | 36W | 38.4W | |
| RIPPLE & NOISE (max.) Note.2 | 80mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | 240mVp-p | |
| VOLTAGE ADJ. RANGE | 4.75 ~ 5.5V | 10.8 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 26.4V | 43.2 ~ 52.8V | |
| VOLTAGE TOLERANCE NOTE.3 | 2.0% | 1.0% | 1.0% | 1.0% | 1.0% | |
| LINE REGULATION | 0.5% | 0.5% | 0.5% | 0.5% | 0.5% | |
| LOAD REGULATION | 0.5% | 0.5% | 0.5% | 0.5% | 0.5% | |
| SETUP, RISE TIME NOTE.5 | 500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load | |||||
| HOLD UP TIME (Typ.) | 50ms/230VAC 10ms/115VAC at full load | |||||
| INPUT | VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 370VDC | ||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||
| EFFICIENCY (Typ.) | 78% | 81% | 83% | 85% | 86% | |
| AC CURRENT (Typ.) | 0.75A/115VAC 0.5 A/230VAC | |||||
| INRUSH CURRENT (Typ.) | COLD START 45A | |||||
| LEAKAGE CURRENT | <2mA / 240VAC | |||||
| PROTECTION | OVER LOAD | 110 ~ 150% rated output power | ||||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||||||
| OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | 55.2 ~ 64.8V | |
| Protection type : Shut down o/p voltage, re-power on to recover | ||||||
| ENVIRONMENT | WORKING TEMP. | -20 ~ +60oC (Refer to output load derating curve) | ||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85oC , 10 ~ 95% RH | |||||
| TEMP. COEFFICIENT | 0.03%/oC (0 ~ 45oC ) | |||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||
| SAFETY &EMC(Note 4) | SAFETY STANDARDS | UL60950-1, CB(IEC60950-1) approved | ||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |||||
| EMI CONDUCTION & RADIATION | Compliance to EN55022 (CISPR22) Class B | |||||
| HARMONIC CURRENT | Compliance to EN61000-3-2,-3 | |||||
| EMS IMMUNITY | Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, light industry level, criteria A | |||||
| OTHERS | MTBF | 394Khrs min. MIL-HDBK-217F (25 ) | ||||
| DIMENSION | 99*97*36mm (L*W*H) | |||||
| PACKING | 0.36Kg; 45pcs/17.2Kg/0.93CUFT | |||||
| NOTE | | |||||
Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.
Switching power supply fault check
Most peripherals now use switching power supplies for voltage conversion. Although the switching power supply has the characteristics of small size, high working efficiency, and good voltage regulation effect, since the switching power supply is directly connected to the commercial power, the change of the commercial power...
High-frequency switching power supply parallel sharing system
Modularization is the development trend of switching power supplies. Parallel operation is an effective solution for large-capacity power supply products. The N+l redundant power supply system can be designed to achieve capacity expansion. This system is a high-frequency switching power supply (1000A/15V) intelligent module...
The wide application of switching power supply modules makes the market highly competitive
Switching power supply has been widely used in the MTD2002 industrial field for its advantages of high efficiency, energy saving, small size and light weight, and has become an important basic product in the industrial field. At present, most of the major enterprises in China's industrial switching power supply module...
Switching power supplies are power supplies that use modern power electronics to control the turn-on and turn-off ratios of switching transistors and maintain a stable output voltage. Switching power supplies typically consist of a pulse width modulation (PWM) control IC and a MOSFET. Compared with the linear power supply,...
Product Categories : Single Output Switching Power Supply
Premium Related Products
