Model No.: MWNES-100-24
· Protections: Short circuit / Overload / Over voltage / Over temperature
· Cooling by free air convection
· LED indicator for power on
· 100% full load burn-in test
· 2 years warranty
|RIPPLE & NOISE (max.) Note.2||120mVp-p|
|VOLTAGE ADJ. RANGE||22.8~26.4V|
|VOLTAGE TOLERANCE Note.3||±1.0%|
|SETUP, RISE TIME Note.5||500ms, 20ms/230VAC 500ms, 20ms/115VAC at full load|
|HOLD UP TIME (Typ.)||30ms/230VAC 25ms/115VAC at full load|
|INPUT||VOLTAGE RANGE Note.5||85 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 373VDC|
|FREQUENCY RANGE||47 ~ 63Hz|
|AC CURRENT (Typ.)||2A/115VAC 1.2A/230VAC|
|INRUSH CURRENT (Typ.)||COLD START 36A|
|LEAKAGE CURRENT||<2mA / 240VAC|
|PROTECTION||OVERLOAD||110 ~ 150% rated output power Protection type:Constant current limiting, recovers automatically after fault condition is removed|
|OVER VOLTAGE||27.6 ~ 32.4V Protection type : Hiccup mode, recovers automatically after fault condition is removed|
|ENVIRONMENT||WORKING TEMP.||-20 ~ +60°C (Refer to output load derating curve)|
|WORKING HUMIDITY||20 ~ 90% RH non-condensing|
|STORAGE TEMP., HUMIDITY||-40 ~ +85°C , 10 ~ 95% RH|
|TEMP. COEFFICIENT||±0.03%/°C(0 ~ 50°C)|
|VIBRATION||10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes|
| SAFETY & |
|SAFETY STANDARDS||UL60950-1, CB(IEC60950-1),CCC GB4943.1:2011 approved|
|WITHSTAND VOLTAGE||I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC|
|ISOLATION RESISTANCE||I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH|
|EMC EMISSION||Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3|
|EMS IMMUNITY||Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-1, light industry level, criteria A|
|Others||MTBF||320.7Khrs min. MIL-HDBK-217F (25°C)|
Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.
Most peripherals now use switching power supplies for voltage conversion. Although the switching power supply has the characteristics of small size, high working efficiency, and good voltage regulation effect, since the switching power supply is directly connected to the commercial power, the change of the commercial power...
Modularization is the development trend of switching power supplies. Parallel operation is an effective solution for large-capacity power supply products. The N+l redundant power supply system can be designed to achieve capacity expansion. This system is a high-frequency switching power supply (1000A/15V) intelligent module...
Switching power supply has been widely used in the MTD2002 industrial field for its advantages of high efficiency, energy saving, small size and light weight, and has become an important basic product in the industrial field. At present, most of the major enterprises in China's industrial switching power supply module...
Switching power supplies are power supplies that use modern power electronics to control the turn-on and turn-off ratios of switching transistors and maintain a stable output voltage. Switching power supplies typically consist of a pulse width modulation (PWM) control IC and a MOSFET. Compared with the linear power supply,...
Product Categories : Single Output Switching Power Supply
Premium Related Products