High Quality 5V 12V 24V 48V Power Supply 60W (S-60)

Model NO.: S-60-1 Warranty: >2 Years Input Voltage: 24V Starting Mode: Self-excited Switching Power Supply Power Supplying System: Terminal Power Distribution Equipment Modulation System: PFAW Brand: Omwo Trademark: OMWO Origin: Zhejiang Output Type: Single Output Power: 1 - 50W Connection Mode: Series Switching Power Supply Voltage Regulating Mode: Frequency Modulation Type Energy Transmission: Two-way Transmission Certification: CE, UL, RoHS, ISO, CCC, CB, CSA Size: 159*98*38mm Specification: 159*98*38mm HS Code: 8504401990 5V 12V 24V 48V power supply 60w(S-60) Features 1.High Efficiency and good price 2.Built-in EMI filter 3.100% full load burn-in test 4.Low output ripple and noise
5.Protection:Over load/Over voltage/Short circuit 6.LIFETIME WARRANTY!   Specifications

MODEL		S-60-5	S-60-12	S-60-15	S-60-24
OUTPUT	DC VOLTAGE	5V	12V	15V	24V
	RATED CURRENT	12A	5A	4A	2.5A
	CURRENT RANGE	0 ~ 12A	0 ~ 5A	0 ~ 4A	0 ~ 2.5A
	RATED POWER	60W	60W	60W	60W
	RIPPLE & NOISE (max.)	120mVp-p	120mVp-p	150mVp-p	150mVp-p
	VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V
	VOLTAGE TOLERANCE	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	300ms, 50ms, /230VAC      800ms, 50ms/115VAC at full load
	HOLD TIME	90ms/230VAC      12ms/115VAC at full load
INPUT	VOLTAGE RANGE	85~132VAC/170~264VACselected by switch
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	80%	85%	85%	86%
	AC CURRENT	2A/115VAC       1A/230VAC
	INRUSH CURRENT (max.)	COLD START 20A/115VAC 40A/230VAC
	LEAKAGE CURRENT	<3.5mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed.
	OVER VOLTAGE	5.75 ~ 6.75V	13.8 ~ 16.2V	17.25 ~ 20.25V	27.6 ~ 32.4V
		Protection type : Hiccup mode, recovers automatically after fault condition is removed.
ENVIRONMENT	WORKING TEMP.	-10 ~ +60°C (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C ,10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ (0 ~ 50)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	Desgin refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMS	EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved
Others	MTBF	316.2K hrs min. MIL-HDBK-217F (25)
	DIMENSION	159*97*38mm (L*W*H)
	PACKING	0.48Kg; 40pcs/20Kg
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.
	4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Single Output Switching Power Supply