S-100-48 100 Watts LED Power Supply 48V 2A

Model NO.: S-100-48 Warranty: >2 Years Input Voltage: 24V Starting Mode: Self-excited Switching Power Supply Power Supplying System: Terminal Power Distribution Equipment Modulation System: PFAW Brand: Omwo Trademark: OMWO Origin: Zhejiang Output Type: Single Output Power: 1 - 50W Connection Mode: Series Switching Power Supply Voltage Regulating Mode: Frequency Modulation Type Energy Transmission: Two-way Transmission Certification: CE, UL, RoHS, ISO, CCC, CB, CSA Size: 159*98*38mm Specification: 159*98*38mm HS Code: 8504401990  1.High Efficiency and good price
2.Built-in EMI filter
3.100% full load burn-in test
4.Low output ripple and noise
5.Protection:Over load/Over voltage/Short circuit
6.LIFETIME WARRANTY!
 
Specifications

MODEL		S-100-5	S-100-7.5	S-100-12	S-100-15	S-100-24	S-100-48
OUTPUT	DC VOLTAGE	5V	7.5V	12V	15V	24V	48V
	RATED CURRENT	20A	13.6A	8.5A	6.7A	4.5A	2A
	CURRENT RANGE	0 ~ 20A	0 ~ 13.6A	0 ~ 8.5A	0 ~ 6.7A	0 ~ 4.5A	0 ~ 2A
	RATED POWER	100W	102W	102W	100.5W	108W	96W
	RIPPLE & NOISE (max)	80 mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	120mVp-p
	VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	6.75 ~ 8.25V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V	43.2 ~ 52.8V
	VOLTAGE TOLERANCE	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.3%	±0.3%	±0.2%	±0.2%
	LOAD REGULATION	±0.5%	±0.5%	±0.3%	±0.3%	±0.2%	±0.2%
	SETUP, RISE, HOLD TIME	200ms, 80ms, 20ms at full load
INPUT	VOLTAGE RANGE	85 ~ 132VAC/180 ~ 264VAC selected by switch       255 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY	78%	80%	81%	81%	84%	84%
	AC CURRENT	2.4A/115VAC          1.2A/230VAC
	INRUSH CURRENT (max)	COLD START 30A/115VAC 60A/230VAC
	LEAKAGE CURRENT	<1mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power (150 ~ 200% rated output power for S-100-7.5 only)
		Protection type : Shut down o/p voltage, re-power on to recover.
ENVIRONMENT	WORKING TEMP.	-10 ~ +60°C (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C ,10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ (0 ~ 50)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	Desgin refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved
	WITHSTAND VOLTAGE	I/P-O/P:2.5KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved
Others	MTBF	322.4K hrs min. MIL-HDBK-217F (25)
	DIMENSION	199*98*38mm (L*W*H)
	PACKING	0.6Kg; 30pcs/18.8Kg
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.

Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Single Output Switching Power Supply