Wxe-150s-24 LED Switching Power Supply

Model NO.: WXE-150S-24 Warranty: >2 Years Input Voltage: 24V Starting Mode: Self-excited Switching Power Supply Power Supplying System: Terminal Power Distribution Equipment Modulation System: PFAW Brand: Omwo Transport Package: Standard Export Packing Origin: Zhejiang Output Type: Single Output Power: 1 - 50W Connection Mode: Series Switching Power Supply Voltage Regulating Mode: Frequency Modulation Type Energy Transmission: Two-way Transmission Certification: CE, UL, RoHS, ISO, CCC, CB, CSA Trademark: OMWO Specification: 159*98*38mm HS Code: 8504401990  Features: 
High efficiency, high reliability
AC input range selected by switch
100% full load burn-in test
Protection: Short circuit/ Over load / Over voltage
Cooling by free air convection
Fixed switching frequency at 25KHz
2 years warranty 
 

SPECIFICATIONS
OUTPUT
Model	WXE-150S-5	WXE-150S-9	WXE-150S-12	WXE-150S-13.5	WXE-150S-15	WXE-150S-24	WXE-150S-27	WXE-150S-48
DC Voltage	5V	9V	12V	13.5V	15V	24V	27V	48V
Rated Current	30A	16.7A	12.5A	11.2A	10A	6.5A	5.6A	3.2A
Current Range	0-30A	0-16.7A	0-12.5A	0-11.2A	0-10A	0-6.5A	0-5.6A	0-3.2A
Rated Power	150W	150.3W	150W	151.2W	150W	156W	151.2W	153.6W
Ripple & Noise	150mVp-p	180mVp-p	180mVp-p	180mVp-p	180mVp-p	240mVp-p	240mVp-p	240mVp-p
Voltage Adj. Range	±10%	-12%;+15%	-12%;+10%	-12%;+11%	±10%	-12%;+16%	-12%;+11%	±10%
Voltage Tolerance	±2%	±1%	±1%	±1%	±1%	±1%	±1%	±1%
Setup, Rise, Hold Up Time	100ms,50ms,20ms at full load
INPUT
Voltage Range	88~132VAC/176~264VAC selected by switch   47~63Hz; 248~370VDC
AC Current	3.2A/115V   1.6A/230V
Efficiency	78%	80%	82%	83%	84%	85%	86%	87%
Inrush Current	Cold start 35A/230VAC
Leakage Current	<3.5mA/240VAC
PROTECTION
Over Load	110%~160%
	Protection type: Shut down o/p voltage, re-power on to recover
Over Voltage	115%~135%
	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT
Working Temp., Humidity	-10ºC~+60ºC; 20%~90%RH
Storage Temp., Humidity	-20ºC~+85ºC; 10%~95%RH
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY
Withstand Voltage	I/P-O/P: 3KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
STANDARD
Safety Standard	Design refer to UL1012, UL1950, TUV EN60950
EMC Standard	Design refer to EN55022, EN61000-3-2, -3, EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, EN55024
Others
Dimension	199*110*50mm(L*W*H)
Weight	0.8Kg
Packing	16pcs/13.8Kg/0.95CUFT
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 
 

Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Single Output Switching Power Supply