Wxe-50net-B 50W LED Switch Power Supply, SMPS

Model NO.: WXE-50NET-B Warranty: >2 Years Input Voltage: 15V Starting Mode: Self-excited Switching Power Supply Power Supplying System: Terminal Power Distribution Equipment Modulation System: PFAW Brand: Omwo Transport Package: Standard Export Packing Origin: Zhejiang Output Type: Single Output Power: 1 - 50W Connection Mode: Series Switching Power Supply Voltage Regulating Mode: Frequency Modulation Type Energy Transmission: Two-way Transmission Certification: CE, UL, RoHS, ISO, CCC, CB, CSA Trademark: OMWO Specification: 159*98*38mm HS Code: 8504401990 Specifications
LED Switching Power Supply WXE-50NET-B
Protection:SC/OC/OV 
Cooling by free air convection 
Triple Output 
2 Year Warranty
Meanwell Triple Output Power Supply NET-50A 50W LED Switching Power Supply,SMPS Power Supply
 
Features :
 
Universal AC input / Full range
Protections:Short Circuit / Overload / Over Voltage
Cooling by free air convection
100% full load burn-in test
2 years warranty
 
Specification:
 

MODEL		WXE-50NET-B
OUTPUT	OUTPUT NUMBER	CH1	CH2	CH3
	DCVOLTAGE	5V	12V	-5V
	RATEDCURRENT	4A	2A	0.5A
	CURRENTRANGE	0.6~5A	0.2-2.5A	0.1-0.7A
	RATED POWER	46.5W
	RIPPLE&NOISENOTE.2	80MVP-P	120mVp-p	120mVp-p
	VOLTAGEADJ.RANGE	CH1: 4.75~5.5V
	VOLTAGETOLERANCENOTE.3	±2.0%	±6.0%	±5.0%
	LINEREGULATION	±0.5%	±1.0%	±1.0%
	LOADREGULATION	±1.5%	±3.0%	±1.0%
	SETUP.RISEHOLD.TIME	500ms,30ms/230VAC ,1200ms, 30ms/115VAC at full load
	HOLD TIME	50ms/230vac  10ms/115vac at full load
INPUT	VOLTAGERANGE	85~264VAC  120~370VDC
	FREQUENCYRANGE	47~63HZ
	EFFICIENCY	76%
	AC CURRENT	1.1A/115vac    0.65A/230VAC
	INRUSH CURRENT	COLD START 45A
	LEAKAGECURRENT	<2mA/240VAC
PROTECTION	OVERLOAD	110~150% rated outputpower
		Protection type:Hiccup mode,recovers automatically after fault condition is removed
	OVER VOLTAGE	CH1:5.75~6.75V
		Protection type:Shut down o/p voltage,re-power on to recover
ENVIRONMENT	WORKINGTIMP	-20~+60°C (Refer to "Derating Curve")
	WORKINGHUMIDITY	20~90% RH non-condensing
	STORAGE TEMP HUMIDITY	-40~+85°C 10~95%RH
	TEMPCOEFFICIENT	±0.03%/°C (0~45°C )
	VIBRATION	10~500HZ,2G10min/1cycle period for 60 min each alongX,Y,Zaxes
SAFETY&EMC	SAFETYSTANDARDS	UL60950-1 Approved,CB Approved by TUV(design Refer to IEC 60950-1)
	WITHSTAND VOLTAGE	1/P-0/P:3KVAC 1/P-FG:2KVAC 0/P-FG:0.5KVAC
	ISOLATIONRESISTANCE	1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC/25°C/70%RH
	EMI CONDUCTICN&	Compliance to EN55022(CISPR22) Class B
	RADIATION
	HARMONICCURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204,EN50204,EN61000-6-1 Light industry level criteria A
QTHERS	MTBF	348.4 Khrs min MIL-HDBK-217F(25°C)
	DIMENSION	129*98*38mm(L*W*H)
	PACKING	0.44Kg ;30pcs / 14.2Kg / 0.72CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.
	4. Line regulation is measured from low line to high line at rated load.
	5. Load regulation is measured from 20% to 100% rated load. and other output at 60% rated load. 6.Each output can work within current range.But total output power can`t exceed rated output power.
	7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.For Guidance on how to perform these EMC tests.please refer to "EMI testing of component power supplies"

Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Single Output Switching Power Supply