Plating CRS power supply

1. Usage & Meaning of Model

The product is modern and ideal Power Supply used in electroplated quality, aluminium-anode dealing, elecrolysis ,smelting the rare earth, electrocoating,and protection for chemical device against anode corrosive. Supplying power into the accumulator, and adjusting the speed for direct-current machinery etc, like those lieus that is waiting to need direct current power supply.

1) Meaning of Model

Symbol of Cooling Mode: A---auto cooling F---wind cooling

S---water cooling J---oil cooling

Symbol of Application: D---electroplating H---electrochemistry

Y---electrocoating C---accumulator charging

S---electric machinery speeder

Symbol of device model: k--- crystal brake tube voltage-adjusting

z---electromagnetic voltage-adjusting

2. Technical Parameters & Properties

1) Adopted standard:

Corporation standardQ/SCD001-2000<>

2) Main Technical Parameters

² Rated Output Voltage: V;

² Rated Output Current: A;

² Input Power Supply: 380V±10%, 50---60 Hz;

² Accuracy of Constant Voltage : ±1%;

² Soft Start: 0 --- 180 second, optional selection;

² Load Grade: I, also continually running under the status of 100% rated current.Ii

3) Properties

² Automatically stabilizing voltage and current capacity;

l Constant-voltage and current-limiting: When the series rectifier working under the status of constant voltage, it can output different current capacity according to the different load, however, its output voltage is constant. It can automatically start the current-limiting function if load flow reaches or even exceeds 10% of rated value, in the other words, its maximum current will not be allowed to exceed the rated value;

l Stationary current and voltage-limiting: When the series rectifier working under the status of stationary current, it may output different voltage according to the different load, however, its output current is stationary. It may automatically start the voltage-limiting function if load flow reaches or even exceeds the rated value, in the other words, its maximum voltage will not be allowed to exceed the rated value;

² Reliable protective functions towards over current and short-circuit: The product may automatically block outgoing impulse

and keep operating time 10 ms till it turns power supply off if load current exceeds 50% of rated value;

² Lack phase protective function: The product may automatically block outgoing impulse and keep operating time 10 ms till voltage of three phase power recover to the normal status;

² Attached remote unit or attached central controlled system that can control several sets of machinery at same time; (You must illustrate when order)

² Double vacuum dipping lacquer and then baking applied in the main transformer of the product;

² Tri-phase Integrated Trigger Controller has multi protective functions; having such virtues as anti-interference, presetting conveniently and etc.

² Soft start: it may prevent efficiently accident due to high current;

² Elegant contour and its rotproofness.

Contact us if you need more details on Plating Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Copper Plated CRS Power Supply、Zinc-Ni CRS Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Electronic Component > Electroplating Rectifier Equipment