Model No.: MWNES-35-1
Features 1.High Efficiency and good price 2.Built-in EMI filter 3.100% full load burn-in test 4.Low output ripple and noise
5.Protection:Over load/Over voltage/Short circuit 6.LIFETIME WARRANTY! Specifications
|CURRENT RANGE||0 ~ 7A||0 ~ 3A||0 ~ 1.5A||0 ~ 1A||0 ~ 0.8A|
|RIPPLE & NOISE (max.)||80mVp-p||120mVp-p||200mVp-p||220mVp-p||240mVp-p|
|VOLTAGE ADJ. RANGE||4.75 ~ 5.5V||10.8 ~ 13.2V||21.6 ~ 26.4V||32.4 ~ 39.6V||43.2~ 52.8V|
|SETUP, RISE TIME||500ms,30ms at full load|
|HOLD TIME||50ms/230VAC 10ms/115VAC at full load|
|INPUT||VOLTAGE RANGE||85~264VAC or120~370VDC|
|FREQUENCY RANGE||47 ~ 63Hz|
|AC CURRENT||0.75A/115VAC 0.5A/230VAC|
|INRUSH CURRENT (max.)||COLD START 45A|
|PROTECTION||OVERLOAD||Above 110~150% rated output power|
|Protection type : Constant current limiting, recovers automatically after fault condition is reoved|
|Protection type :Shut off|
|ENVIRONMENT||WORKING TEMP.||-20 ~ +60°C|
|WORKING HUMIDITY||20 ~ 90% RH non-condensing|
|STORAGE TEMP., HUMIDITY||-40 ~ +85°C, 10 ~ 95% RH|
|TEMP. COEFFICIENT||±0.02%/ (0 ~ 40°C)|
|VIBRATION||10 ~ 500Hz, 2G 10min./1cycle, 60min|
|SAFETY & EMC||SAFETY STANDARDS||Desgin refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved|
|WITHSTAND VOLTAGE||I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC|
|ISOLATION RESISTANCE||I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC|
|EMC EMISSION & IMMUNITY||EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved|
|Others||MTBF||≥370K hrs min|
Contact us if you need more details on Switching Power Supply. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Switch Power Supply、LED Switch Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.
Most peripherals now use switching power supplies for voltage conversion. Although the switching power supply has the characteristics of small size, high working efficiency, and good voltage regulation effect, since the switching power supply is directly connected to the commercial power, the change of the commercial power...
Modularization is the development trend of switching power supplies. Parallel operation is an effective solution for large-capacity power supply products. The N+l redundant power supply system can be designed to achieve capacity expansion. This system is a high-frequency switching power supply (1000A/15V) intelligent module...
Switching power supply has been widely used in the MTD2002 industrial field for its advantages of high efficiency, energy saving, small size and light weight, and has become an important basic product in the industrial field. At present, most of the major enterprises in China's industrial switching power supply module...
Switching power supplies are power supplies that use modern power electronics to control the turn-on and turn-off ratios of switching transistors and maintain a stable output voltage. Switching power supplies typically consist of a pulse width modulation (PWM) control IC and a MOSFET. Compared with the linear power supply,...
Product Categories : Single Output Switching Power Supply
Premium Related Products